DQ500-(0BH325025JZ16)
The 0BH 325 025 J Z16 is a genuine Volkswagen Group DSG mechatronic control unit for the 7-speed wet-clutch DSG (DQ500) transmission. It combines the electronic control module with the hydraulic valve body that manages gear selection and clutch actuation. It is normally pre-programmed for a specific vehicle using the VIN before installation, so compatibility is ensured.
$0.00
Typical vehicle applications
Used in VW Group vehicles with the DQ500 7-speed DSG gearbox, including AWD/4Motion/quattro models such as:
-
Audi SUVs and performance models with DQ500
-
Volkswagen Tiguan 4Motion, Golf R (DQ500 versions), Transporter/Multivan
-
Škoda Kodiaq RS, Superb AWD
-
SEAT 4Drive models
Fitment should be confirmed with VIN.
Common fault codes
Faults associated with DQ500 mechatronic failures (typical for this type of unit) include:
-
P0607 – Control module malfunction
-
P17BF – Slow or insufficient hydraulic pressure build-up
-
P0841 – Transmission pressure sensor implausible signal
-
Clutch position sensor codes – often related to clutch 1 or clutch 2 sensor issues
-
Communication errors – e.g., lost communication with TCU
These codes usually point to internal electronic or hydraulic issues in the mechatronic unit.
Typical symptoms
-
Flashing PRNDS or transmission warning lights
-
Harsh, delayed, or erratic shifts
-
Limp mode or reduced driveability
-
Loss of certain gears (e.g., odd or
| Weight | 1200 kg |
|---|
Reviews
There are no reviews yet.